Metallic Epoxy Floors in Hayward

Metallic epoxy turns concrete into a seamless, flowing floor for Hayward homes and businesses.

(510) 880-3198

Get a Free Estimate

Tell us about the floor. Only your name and phone are required.

Form powered by splitforms

Swirled metallic epoxy floor in Hayward, CA

The finish

Pearlescent and metallic pigments in clear resin, worked by hand into swirls and veining over a tinted base. No two floors look alike.

A note on cracks

Because metallic floors are glossy and smooth, any moving crack can show through. In Hayward, we take extra care with crack repair and talk with you upfront about where a line could appear. Sometimes we place a design feature to work with a known crack.

Where it is used

Garage conversions and ADUs, showrooms in the industrial area, offices, studios and salons.

Topcoat options

For rooms with lots of window light, a UV-stable topcoat keeps the colors clear.

Choosing colors

We make a sample board based on your space and lighting. Graphite and silver, bronze and black, and ocean blues are common choices.

How many days?

Two to three.

Is it slippery?

It can be when wet; we can add a fine texture to the topcoat.

Care

Sweep grit often and clean with a mild soap. A fresh topcoat can renew the gloss years later.

Showrooms on the industrial side

Cabinet makers, tile importers and lighting companies with showrooms in the business parks use metallic floors to make a modest space look upscale for clients.

Metallic floors in Hayward

Metallic epoxy creates a floor with depth and shine that suits showrooms, salons, offices and homes. In Hayward we see it in converted garages, home offices and businesses near downtown that want a floor customers remember.

Questions about metallic floors

Can it go over a cracked slab? We repair cracks first. Moving cracks may show over time.

Will it look the same as samples? Similar, but each floor is unique.

Is it hard to keep clean? No. Dust-mop and use a mild cleaner.

Prep

Metallic finishes highlight flaws, so we grind flat, fill cracks and sometimes add a leveling coat.

Choosing colors and topcoats

We bring sample boards in silvers, blues, coppers and pearls so you can see them in your own light. For topcoats, high gloss maximizes depth, while satin hides scratches and glare. In a busy salon or showroom we often suggest satin for that reason. Plan on three to four days for the full install, including prep, the pour and the clear coat.

Showroom tip

Mats at the entry keep grit off the finish.

Showrooms, detailing studios and storefronts

Metallic epoxy floor in an auto detailing studio in Hayward, CA

Metallic epoxy gets a lot of attention on social media in living rooms, but in Hayward some of the most practical uses are commercial. Auto detailing shops, small showrooms, barbershops and retail spaces along Hesperian Boulevard and downtown on B Street want a floor that looks expensive, reflects light and still wipes clean at the end of a long day. A poured metallic system does all of that on a slab that might otherwise be patched gray concrete.

Because metallic floors show what is beneath them, prep matters more here than with any other coating. Old adhesive from vinyl tile or carpet glue has to be fully ground off. Cracks are filled and ground flat, and low spots are skimmed so the pour flows evenly. We then lay a dark or light base color, pour the metallic layer and work it by hand to create movement, and finish with a clear coat chosen for the traffic the space will see.

Keeping a business running during the pour

Most small storefronts can schedule a metallic floor across a few closed days. We plan the order so the epoxy cures overnight with stable temperature, which is easier in Hayward's mild climate than in most of California. For shops with a back room, we can pour the sales floor first and the back area later.

Living with a reflective floor

High gloss shows dust and footprints more than a satin finish. For high-traffic spaces we often recommend a satin clear topcoat with a light anti-slip additive, which keeps the depth of the metallic look while hiding everyday wear. Felt pads under chairs and display fixtures help the surface stay sharp.

Can metallic go over a slab with old tile glue? Yes, once the glue is completely ground away and the surface is tested.

Design your metallic floor

Call (510) 880-3198.